Chain type Fixed Upper Through Screen CUS/ Madoka
- [Features of chain type header mechanism]
- ・We offer herein a Sudare screen allowing adjustment of the height of space between header and Sudare screen main body.
- ・The space height is adjusted by the ball chain. Up-and-down movement can be made by a light-touch operation, making it possible to manufacture larger sizes than the cord type.
- ・The header part is provided with a balance only on the front side. The rear balance (150mm high) is offered as an option.
- ・A drum mechanism is housed in the header part. As an endless chain is adopted, the height of the chain is kept constant even when the Sudare screen main body is lifted to the utmost height.
- ・The upper through height is up to 2000mm.
- ・The product height is the height of the Sudare screen main body + about 60mm.
- ・The height is different from the height of the specified manufacturing dimension.
- ・Mounting of the header part to the ground material is done by the one-touch brackets. The Sudare screen main body can be mounted after installing the brackets.
- ・Also, the positions of the brackets can be set freely by sliding.
- [Features of fixed type Sudare screen part]
- ・We offer herein a product whose Sudare texture fixed like a tapestry can be raised or lowered by the upper through mechanism.
- ・The design of the Sudare texture can be selected from 30 types and can be used for a partition suitable for the purpose of use.
- ・The maximum manufacturing dimension is up to W24000xH2500.
- ・For making the guest rooms into open rooms or into rooms for a small group with a table using the Sudare textures as blindfolding partitions, use of this type Sudare screens capable of up-and-down movement will save the cost compared to the constructed partitions.
- ・For price, please refer to price list at production width (W) and production height (H2).
- The chain height can’t be adjusted after shipment from the factory. (Special jigs are necessary.)
- [Ceiling mounting] Mounting bracket (attachments)
|Width of product||500～900||910～1500||1510～2000||2010～2400|
Number of the Sudare screen main body hanging strings and the rolling strings
|Sudare screen main body hanging strings||2 strings||3 strings||4 strings||5 strings|
Rough indication of product weight (Unit: kg)
- Product weight Kg = (W x H x Texture weight per m2 x 1.2) + (Product width x 0.7) + (Product height x 0.3)
- * The values in the table above are the weights when the texture weight per m2 is taken as 1.2kg.
Width dimensions of product and texture
|Product height||Chain height||Mounting height|
* After shipment from the factory, the chain height can’t be changed.
Your requirement to change the height would be dealt with at the factory with an additional cost.
- For the prices of the rear balance, refer to the price list below.
Measurement method: Ceiling mounting
- [Points to note] (Before measurement)1. For Upper Through Sudare Screen, a wooden ground material with a thickness of 20mm or more is necessary. Due to heaviness of the product, mounting to hollow boards or the like is impossible.
- 2. This product is exclusively for ceiling mounting. If you prefer front mounting, construct a ceiling face with a wooden ground material instead of using the attachment offered as an option.
- ◎ Width and height are specified in units of 10mm for manufacturing.
- [Ceiling mounting] * Product exclusively for ceiling mounting
- ① Image the necessary area of the Sudare screen, which is illustrated in the figure ①, under the condition that the Sudare screen is lifted to the utmost height.
- ② The width of the Sudare screen main body is made 10mm smaller than the width of the place of mounting. (The width of the Sudare screen main body is 20mm smaller than that of the header part.) The maximum height is 60mm less than that of the place of mounting. The product price corresponds to the dimension of the Sudare screen main body.
- ③ Determine the upper clearance above the Sudare screen main body and specify the upper through height. The maximum height is H2000.
- ④ Determined the height of the Sudare screen main body under the condition that the upper through is lowered to the desired height and specify the height of the fixed Sudare screen.
Ex.) If the Sudare screen is manufactured so that the height of the Sudare screen main body may become 700mm under the condition that the mounting height is 2700mm and the height of the upper through is 2000mm at the maximum, a partition for guest rooms capable of up-and-down movement will be produced.
- ⑤ When the product is used as a partition, use of the rear balance is recommended which blindfolds the opposite side of the front balance.
- ⑥ We can also receive the order of products without a balance which would not blindfold the header mechanism. (The price is the same with the products based on the standard specification, which are provided with a front balance.)
For the places close to air conditioner outlets, products without a balance are recommended.
- * The product height is the manufacturing height + 60mm. ◎ Width and height are specified in units of 10mm for manufacturing.
How to order
|Procedure||Example of indication||Points to note|
|1.||Specify the product name.||CUS||The alphabetical capital letters indicate the decoration style.||2.||Specify the texture No.||495||Select the texture No. from among 30 types in the Shikisai 02 texture sample sheet.|
|3.||Specify flameproof or non-flameproof.||FP
|For a flameproof product, suffix FP. Even for a non-flameproof product, specify non-flameproof product.|
|4.||Specify the manufacturing dimensions.||W1600XH800||Specify the manufacturing dimensions in sequence from width to height (H2) without fail.|
|5.||Specify the upper through height.||H1700||The height is the maximum height of up-and-down movement of the Sudare screen main body.|
|6.||Specify clearly the mounting height.||H2500||As the up-and-down operation chain is an endless chain, adjustment of the length after shipment from the factory is impossible. Therefore, specify the mounting height clearly so that the chain may be manufactured corresponding to the standard height of the up-and-down operation chain (refer to the figure above).|
|7.||Specify the position of up-and-down operation chain||Right|
|8.||Specify the number of units.||1 unit||In the case of products of different specifications, describe the specification respectively for every unit.|
- Specify the width and height of the product in units of 10mm.
- [Basic delivery date] Placement of order>> Shipment after 7 days from the date of reception of order by our company/ 9 days in the case of flameproof products
CUS Price listA
CUS Price listB
CUS Price listC
※The price listed in this side is applicable for domestic (Japan) only
Since price being exported to overseas shall be different, we will make a quotation accordingly.
The freight cost shall be added separately from the commodity price.