株式会社鹿田産業 オーダーすだれ

SHIKISAIMade-to-order Sudare screens for business and residential use

Pull cord type Roll Screen SR/ Honoka

SR HONOKA

Spring type Roll Screen SR/ Honoka

Features

  • ・We offer herein a spring type roll screen operated by a pull cord.
  • ・By pulling the cord down, the texture is automatically rolled.
  • ・Rolling displacement protection plates are provided as standard equipment that protect the screen from rolling displacement and prolong the life of the texture.
  • ・When two screens are installed alongside each other, the separation between the textures is about 30mm.
  • ・The rolling speed of final rolling is lowered for calmness.
  • ・Strength of the spring can be adjusted by a dial.
  • ・Rolling height can be set up at the time of factory shipment. [Patent No.4355741 granted.]

Overall view

Width dimensions of product and texture

  • Width of the Sudare texture becomes about 28mm less than that of the product.

 

 

Sudare width = Product width – about 26mm

Dial side clearance Product width – 14mm
Non-dial side clearance Product width – 14mm

Side view of roll mechanism

  • Front mounting
    SR_honoka_天井付
    • For the depth of the ground, 80mm from the wall face to the room inside is necessary at least.
    •  

       

Product height L

Length of side bracket
A

Distance between wall face and rolling displacement protection plate
B

Distance between wall face and drum axis
C

Length of mounting bracket
D

Diameter of rolling displacement protection plate
E
500~1250 73 95.5 59 58 85 6
1250~2000 78 103 64 58 95 6
2000~2500 84 123.5 70 58 107 6
Unit: mm

When mounting to a curtain box

Mounting bracket

Number of pieces of mounting brackets and screws per product
Width of product 500~900 910~1500 1510~2000
Mounting bracket 2 3 4
Screw 4 6 8

Attachments (Spring adjustment handle)

  • Shown above is the component to turn the spring adjustment dial.

Pull cord length

Product height Length
~2000 300
~2500 600
Unit: mm

* Upon request, extension of the length is possible up to 600mm even when the product height is 2000mm or less.
 
 

Colors of mechanism and brackets

Color Beige Brown Black
Mechanism

(* The images are for the CRS type.)
Bracket
Texture No. 410・440・461・465

480・482

415・441・450・451

453・454・455・457

458・462・463・464

466・481・483・485

486・487

452・456・467・488
491・492
* The above table is for the standard specification case. Colors can be specified at your option.

Pull cord/ Pull handle

Brown Beige Black
Pull handle
Brown Beige Black
Pull cord tab
Texture No. 458・464・466・486・487 410・440・461・465・480・482 452・456・467・488・491・492
Brown Clear
Pull handle
Natural Natural
Pull cord tab
Texture No. 415・441・451・453・454

455・463・481・483
450・457・462・485
* The above table is for the standard specification case. Colors can be specified at your option.

Color of weight bar (natural wood)

Color Natural Gold Brown Black
Weight bar
Texture No. 410・440・461・480・465

・482491・493
450・457・462・485 415・441・451・453・454

455・458・463・464・466

481・483・486・487
452・456・467・488・491・492
* The above table is for the standard specification case. Colors can be specified at your option.

Rolling displacement protection plate

  • The rolling displacement protection plates are delivered installed as per the standard specification.
  • Patent No.3838649 granted.
Color Translucent Brown (translucent) Black
Rolling displacement protection plate

(* The images are for the CRS type.)
Texture No. 410・440・461・480・482
415・441・450・451・453

454・455・457・458・462

463・464・466・481・483

・485486・487
452・456・467・488・491・492
* The above table is for the standard specification case. Colors can be specified at your option.
  • If you want delivery without installation, please instruct us at the time of placing the order. Change after delivery can’t be accepted.

Option: Front ornament (balance)

前飾りの例

  • The front ornament is for ceiling mounting.
  • Order is possible for the height ranging from 150mm to 300mm. The standard specification is 200mm. Please specify the height.
  • * If you want to install a balance for front mounting, please use commercially available L-shape brackets or the like.

Option: Dedicated option corresponding to the movable rail (TK25)

SR_honoka_可動式レール1

  • Dedicated round option corresponding to the movable rail (TK25)
  • ● When the Sudare screen is used as a partition between customer seats in restaurants, shops, etc., an interval responding to the number of customers can be prepared quickly by the movable rail to utilize space efficiently.
  • ● When the Sudare screen is not used as a partition, the Sudare screen can be rolled up safely with no operation cords.
  • ● Separately marketed product: Specified rail: OS D40 rail made by Okada Sousyoku Kanamono Co., Ltd. (unpainted product)
  • Points to note: We recommend the pull handle for operating the Sudare texture.
  • For moving the Sudare main body, pull the hanging hook (hazel) by hanging the handle hook (option) to the aluminum frame part. Otherwise, when ordering the Sudare main body (HONOKA), please specify “Movable rail corresponding HONOKA”.
  • ●How to order:
  • ① Please refer to “How to order” and place an order of the Sudare main body. We recommend the “pull handle” for operation.
  • ② Place an order of required number of the attachment runners (TK25) for the Sudare main body.
  • ③ Place an order of required number of the hand hooks (option).
  • ④ Procure OS D40 rail made by Okada Sousyoku Kanamono Co., Ltd. separately from our distributors, etc.
  • (Our company does not sell the rails. TK25 is the attachment runner corresponding only to this rail.)
  • (Marketed product / To be procured separately)

SR_honoka_可動式レール2

  • Photograph of a mounting example (A special order product jointing D40 leading car to our company’s product)
  • Price: 6,000 yen (1 piece)
  • (Please check the required number of brackets for 1 unit in the “Mounting” column in the left table.)
  • SR_hinoka_ハンドフック

    • Handle hook (HF1)
    • Handle hook for the pull handle at a height (white); Price: 1,700 yen (1 piece) is also prepared.

Texture height and diameter of rolling displacement protection plate

Height(mm)
Diameter(mm)
〜1000 〜1100 〜2000
85Φ 410・415・440・441・450・451・452・455・456・457・458・461・462・463・464・465・466・467・482・483・485・486・487・488・491・492 480・481 453・454
Height(mm)
Diameter(mm)
〜1600 〜1800 〜2500
95Φ 440・441・450・455・456・465・466・467・487・491・492 410・415・451・452・457・458・461・462・463・464・480・481・482・483・485・486・488 453・454
Height(mm)
Diameter(mm)
〜2500
107Φ All textures excluding 453 and 454

Rough indications of product weight and texture winding diameter

  • (Unit: mm)
  • Width (mm)
    Height (mm)
    900 1200 1500 1800 2000 Roll diameter (mm)
    500 1.73kg 2.08kg 2.42kg 2.75kg 2.96kg 59
    1000 2.22kg 2.63kg 3.15kg 3.66kg 4.30kg 73
    1500 2.71kg 3.36kg 3.98kg 4.46kg 5.16kg 85
    2000 3.20kg 4.12kg 4.86kg 5.70kg 6.31kg 95
    2500 4.88kg 5.74kg 6.80kg 107
    • The above table is for rough indication and may change depending on the kind of texture.
    • * An average of textures (m2/1kg)

Measurement method: Case of ceiling mounting

  • Specify the manufacturing width (W) by deducting 10mm from the inside dimension of the window frame.
  • Specify the height (H) equal to the inside dimension of the window frame.

 

  • As natural material is used, errors may occur even if product of the same material is ordered. (±1%)
  • Due to its weight, Sudare texture may expand or contract by aging.
  • Due to changes in temperature and humidity, Sudare texture may cause distortion.
  • ◎ Width and height are specified in units of 10mm for manufacturing.

 

Measurement method: Case of front mounting

  • Specify the width (W) of the manufacturing dimension equal to or about 10mm larger than the dimension of the window frame.
  • Specify the height equal to the outside dimension of the window frame.
  • (For mounting on the wall face, check the existence of the ground material.)

 

  • As natural material is used, errors may occur even if product of the same material is ordered. (±1%)
  • Due to its weight, Sudare texture may expand or contract by aging.
  • Due to changes in temperature and humidity, Sudare texture may cause distortion.
  • ◎ Width and height are specified in units of 10mm for manufacturing.

How to order

Procedure Example of indication Points to note
1. Specify the product name. Honoka SR The alphabetical capital letters indicate the decoration style.
2. Specify the texture No. SR410 Select the texture No. from among 27 types of Kasumi marks in the Shikisai 02 texture sample sheet.
3. Specify flameproof or non-flameproof. FP
or
non-flameproof
Flameproof specification are suffixed with FP. Without indication, the specification will be non-flameproof.
4. Specify the product dimensions (manufacturing dimensions). W1800xH1500 Always specify the manufacturing dimension in sequence from width to height.
5. Specify the mounting method. Ceiling mounting Select either of the two methods, ceiling mounting or front mounting.
6. Specify the operating method. Pull handle Select either of the two methods, pull handle or pull cord.
7. Specify colors of mechanism and weight bar. As per the standard specification Specify when you want to change the part colors from the standard specification. Refer to the Shikisai 02 texture sample sheet.
8. Specify the number of units. 5 units The left example means five units of products of the same specification.
9. Specify whether with or without options. With a balance
W1800xH150
The front ornament can only be specified when ceiling mounting is employed. When the size of the front ornament is not specified, the height will be considered 200mm.
  • Specify the width and the height of the product in units of 10mm.
  • [Basic delivery date] Placement of order>> Shipment after 7 days from the date of reception of order by our company/ 9 days in the case of flameproof products

Price list A

Non-flameproof products
Width (mm)
Height (mm)
600~900 ~1200 ~1500 ~1800 ~2000
~500 28,800 33,200 37,600 42,000 45,000
~1000 31,600 36,800 41,900 47,100 50,500
~1500 34,500 40,400 46,300 52,100 56,000
~2000 ※37,400 44,000 50,600 57,200 61,600
~2500 47,600 54,900 62,200
Front ornament 5,500 6,900 8,200 9,600 10,500
Price: JPY
410/415
  • * Only the 900mm-wide products can be manufactured.

 
 

Flameproof products
Width (mm)
Height (mm)
600~900 ~1200 ~1500 ~1800 ~2000
~500 34,000 39,200 44,400 49,600 53,100
~1000 37,300 43,500 49,500 55,600 59,600
~1500 40,800 47,700 54,700 61,500 66,100
~2000 ※44,200 52,000 59,800 67,500 72,700
~2500 56,200 64,800 73,400
Front ornament 6,500 8,200 9,700 11,400 12,400
Price: JPY
410FP/415FP
  • * Only the 900mm-wide products can be manufactured.

Price list B

Non-flameproof products
Width (mm)
Height (mm)
600~900 ~1200 ~1500 ~1800 ~2000
~500 30,000 35,100 40,300 45,500 48,900
~1000 33,000 39,100 45,200 51,300 55,400
~1500 36,000 43,000 50,100 57,200 61,900
~2000 ※38,900 47,000 55,000 63,000 68,300
~2500 50,900 59,900 68,800
Front ornament 5,900 7,400 9,000 10,500 11,500
Price: JPY
440/441/451/452/453/454/455/456/457/458/461/462/463/464/465/466/467/
480/481/485/486/487/488/491/492
  • * Only the 900mm-wide products can be manufactured.
  • Manufacturing of yellow colored parts of textures 491 and 492 is impossible.

 
 

Flameproof products
Width (mm)
Height (mm)
600~900 ~1200 ~1500 ~1800 ~2000
~500 35,400 41,500 47,600 53,700 57,800
~1000 39,000 46,200 53,400 60,600 65,400
~1500 42,500 50,800 59,200 67,500 73,100
~2000 ※46,000 55,500 64,900 74,400 80,600
~2500 60,100 70,700 81,200
Front ornament 7,000 8,800 10,700 12,400 13,600
Price: JPY
440FP/441FP/451FP/452FP/453FP/454FP/455FP/456FP/457FP/458FP/
461FP/462FP/463FP/464FP/465FP/466FP/467FP/
480FP/481FP/485FP/486FP/487FP/488FP/491FP/492FP
  • * Only the 900mm-wide products can be manufactured.
  • Manufacturing of yellow colored parts of textures 491FP and 492FP is impossible.

Price list C

Non-flameproof products
Width (mm)
Height (mm)
600~900 ~1200 ~1500 ~1800 ~2000
~500 35,100 40,900 45,600 52,400 56,300
~1000 38,800 45,700 52,600 59,500 64,100
~1500 42,500 50,500 58,500 66,600 71,900
~2000 ※46,200 55,300 64,500 73,700 79,800
~2500 63,500 70,500 80,700
Front ornament 7,200 9,100 11,100 13,000 14,300
Price: JPY
450/482/483
  • * Only the 900mm-wide products can be manufactured.
  • Manufacturing of yellow colored parts of texture 450 is impossible.

 
 

Flameproof products
Width (mm)
Height (mm)
600~900 ~1200 ~1500 ~1800 ~2000
~500 41,500 48,300 55,000 61,900 66,500
~500 45,800 54,000 62,100 70,300 75,700
~500 50,200 59,600 69,100 78,600 84,900
~500 ※54,600 66,200 76,200 87,000 94,200
~500 76,200 83,200 95,300
~500 8,500 10,800 13,100 15,400 16,900
Price: JPY
450FP/482FP/483FP
  • * Only the 900mm-wide products can be manufactured.
  • Manufacturing of yellow colored parts of texture 450FP is impossible.

※The price listed in this side is applicable for domestic (Japan) only
Since price being exported to overseas shall be different, we will make a quotation accordingly.
The freight cost shall be added separately from the commodity price.