Accordion type Sudare Curtain TCT/ Ryoren
Accordion type Sudare Curtain TCT/ Ryoren
- Grips with magnets are provided, ensuring tight closure.
- A hook stopper metal is attached to the fixed side.
- Fabric tapes (beige colored) are provided to the sleeves, making the Sudare texture stronger against damage.
- * The figure below is the case of manufacturing width of 1000mm.
Grip enlarged view
Rough indication of folded width and weight
- Shown below is the case where the height is 1700mm.
* Slight difference may arise depending on the type of texture.
(1.2 x curtain rail length)
|Folded width||About 85||About 100||About 130||About 155||About 180|
|Weight||About 2Kg||About 3Kg||About 4Kg||About 5Kg||About 6Kg|
- * No rails and runners are attached to this product. Only the S-hooks to hang the texture from the runners are attached.
Height of grips
|Product height||Height from product lower end|
Number of attached S-hooks
|Number of S-hooks||7||8||9||10||11||12||13||14||15||16||17||18||19|
- * Rails and runners are not attached to this product. Only the S-hooks to hang the texture from the runners are attached.
- Image of attaching grips
- Image of attaching stopper metal
Measurement methods as per the cases
- The manufacturing width (W) is 1.2 times the curtain rail width.
- [Points to note (before measurement)]
- 1. A condition is required use Ryoren that there is an existing curtain rail. No curtain rail is attached to the product.
- In the case where curtain rails need to be newly installed, purchase curtain rails in the marketplace and install them. Measurement becomes possible after the installation.
- 2. No curtain rails to be installed are particularly specified, but use of curtain rails equal to or higher than V20 (made by Tachikawa Blind, etc.) is recommendable.
- Install the curtain rail without fail to a place where there’s a wooden ground material with a thickness of 20mm or more.
- 3. Ground materials are necessary for screwing down the mating plates of the magnet grips on wall faces.
- 4. As direction of front mounting or ceiling mounting is a matter of installation of a curtain rail, it makes no difference to Ryoren, however, installation of a rail is such that spaces of 40mm wide at both sides of the rail are ensured to accommodate Ryoren whose fold width is 80mm.
How to order
|Procedure||Example of indication||Points to note|
|1.||Specify the product name.||Ryoren TCT||The alphabetical capital letters indicate the decoration style.|
|2.||Specify the texture No.||TCT410||Select the texture No. from among 24 types of Ryoren mark in the Shikisai 02 texture sample sheet.|
|3.||Specify flameproof or non-flameproof.||FP
|For a flameproof product, suffix FP. Even for a non-flameproof product, specify non-flameproof product.|
|4.||Specify the product dimensions (manufacturing dimensions).||W1200XH1800||The finished width of a product is 1.2 times the rail length. Refer to the price list corresponding to the manufacturing dimensions.
Specify the manufacturing dimensions in sequence from width to height without fail.
In the case of a single opening curtain, place an order by the manufacturing dimensions.
In the case of a double opening curtain, place an order for 2 sheets each of 1/2 of manufacturing width x manufacturing height.
|5.||Specify grip positions.||Single grip (standard specification)||
In the case of single grip, a grip is attached to either of the right side or the left side of the Sudare curtain main body. The opposite side is provided with a stopper metal. As the design is both sides compatible, attachment to a desired side is possible by selecting the front face or the back face.
In the case of double grips, both the right grip and the left grip are of the magnet grip specification. When double grips are specified, no stopper metal is attached.
|6.||Specify the number of units.||5 units|
- The product width is 1.2 times the curtain rail length.
- Specify the width and height of the product in units of 10mm.
- [Basic delivery date] Placement of order>> Shipment after 7 days from the date of reception of order by our company/ 9 days in the case of flameproof products
Price list common to A and B
Price list C
※The price listed in this side is applicable for domestic (Japan) only
Since price being exported to overseas shall be different, we will make a quotation accordingly.
The freight cost shall be added separately from the commodity price.